Model parts with Harnessed cannot make Supporting Attacks and cannot use Weapons. Shooting Weapons carried by model parts with Harnessed can be used by other model parts of the same model (as long as they do not have Harnessed or Inanimate). A model with with at least one model part with Harnessed is considered to be mounted.

Model parts with Harnessed cannot make Supporting Attacks and cannot use Weapons. Shooting Weapons carried by model parts with Harnessed can be used by other model parts of the same model (as long as they do not have Harnessed or Inanimate). A model with with at least one model part with Harnessed is considered to be mounted.

Units in base contact with one or more enemy models with Fear suffer -1 Discipline. At the start of each Round of Combat, such units must take a Discipline Test, called a Fear Test. If this test is failed, the models in the unit are Shaken until the end of the Round of Combat. Models that have Fear themselves are immune to the effects of Fear.

Units in base contact with one or more enemy models with Fear suffer -1 Discipline. At the start of each Round of Combat, such units must take a Discipline Test, called a Fear Test. If this test is failed, the models in the unit are Shaken until the end of the Round of Combat. Models that have Fear themselves are immune to the effects of Fear.

- Knows 1 spell. - Can select between the Learned Spell 1 of its chosen Path and the Hereditary Spell of its army. The Wizard selects its spells as described in Spell Selection .

- Knows 1 spell. - Can select between the Learned Spell 1 of its chosen Path and the Hereditary Spell of its army. The Wizard selects its spells as described in Spell Selection .

If the attack hits with a natural to-hit roll of '6', the attack causes two hits instead of one.

If the attack hits with a natural to-hit roll of '6', the attack causes two hits instead of one.

Attacks made with a Great Weapon gain +2 Strength, +2 Armour Penetration and always strike at Initiative Step 0 (regardless of the wielder's Agility). A model using this weapon cannot simultaneously use a Shield against Melee Attacks

Attacks made with a Great Weapon gain +2 Strength, +2 Armour Penetration and always strike at Initiative Step 0 (regardless of the wielder's Agility). A model using this weapon cannot simultaneously use a Shield against Melee Attacks

All models come equipped with a Hand Weapon as their default equipment. If a model has any Close Combat Weapon other than a Hand Weapon, it cannot choose to use the Hand Weapon (unless specifically stated). Hand Weapons wielded by models on foot can be used alongside a Shield, then giving Parry

All models come equipped with a Hand Weapon as their default equipment. If a model has any Close Combat Weapon other than a Hand Weapon, it cannot choose to use the Hand Weapon (unless specifically stated). Hand Weapons wielded by models on foot can be used alongside a Shield, then giving Parry

+3 Armor

+3 Armor

Armor +1

Armor +1

+2 Armor

+2 Armor

The wielder gains +1 Attack Value when using Paired Weapons. Attacks made with Paired Weapons gain +1 Offensive Skill and ignore Parry. A model using this weapon cannot simultaneously use a Shield against Melee Attacks.

The wielder gains +1 Attack Value when using Paired Weapons. Attacks made with Paired Weapons gain +1 Offensive Skill and ignore Parry. A model using this weapon cannot simultaneously use a Shield against Melee Attacks.

Successful Aegis saves taken against the attack must be rerolled.

Successful Aegis saves taken against the attack must be rerolled.

A model part with Grind Attacks resolves these attacks at its own Agility. It must choose an enemy unit in base contact with it. The chosen enemy unit suffers a number of hits equal to the value stated in brackets (X). These hits are resolved with the model part’s own Strength and Armour Penetration. If a model has both Grind Attacks and Impact Hits , it may only use one of these rules in the same Round of Combat (its controlling player may choose which). When several model parts in the same unit have Grind Attacks and when X is a random number (e.g. Grind Attacks (2D3)), roll for the number of hits separately for each model part.

A model part with Grind Attacks resolves these attacks at its own Agility. It must choose an enemy unit in base contact with it. The chosen enemy unit suffers a number of hits equal to the value stated in brackets (X). These hits are resolved with the model part’s own Strength and Armour Penetration. If a model has both Grind Attacks and Impact Hits , it may only use one of these rules in the same Round of Combat (its controlling player may choose which). When several model parts in the same unit have Grind Attacks and when X is a random number (e.g. Grind Attacks (2D3)), roll for the number of hits separately for each model part.

At Initiative Step 10, a charging model part with Impact Hits must choose an enemy unit that is in base contact with the attacking model's Front Facing. This unit suffers a number of hits equal to the value stated in brackets (X). These hits are resolved with the attacking model part's Strength and Armour Penetration. If a model has both Grind Attacks and Impact Hits, it may only use one of these rules in the same Round of Combat (its controlling player may choose which). In multipart models, only model parts that also have Harnessed or Inanimate can use their Impact Hits. When several models in the same unit have Impact Hits, and when X is a random number (e.g. Impact Hits (D6)), roll for the number of hits separately for each model part.

At Initiative Step 10, a charging model part with Impact Hits must choose an enemy unit that is in base contact with the attacking model's Front Facing. This unit suffers a number of hits equal to the value stated in brackets (X). These hits are resolved with the attacking model part's Strength and Armour Penetration. If a model has both Grind Attacks and Impact Hits, it may only use one of these rules in the same Round of Combat (its controlling player may choose which). In multipart models, only model parts that also have Harnessed or Inanimate can use their Impact Hits. When several models in the same unit have Impact Hits, and when X is a random number (e.g. Impact Hits (D6)), roll for the number of hits separately for each model part.

After Deployment (including units with Scout), models with Vanguard may perform a 12" move. The move is performed as an Advance Move in the Movement Phase, including any actions and restrictions the unit would normally have (such as Wheeling, Reforming, joining units, leaving units and so on). The 12" distance is used instead of the unit's Advance Rate and March Rate. This move cannot be used to move within 12" of enemy units. This is decreased to 6" for enemy units which have either Scouted or Vanguarded. Units that have moved in this way may not Declare Charges in the first Player Turn (if their side has the first turn). If both players have units with Vanguard, alternate moving units one at a time, starting with the player that finished deploying last. Instead of moving a unit, a player may declare to not move any more Vanguarding units.

After Deployment (including units with Scout), models with Vanguard may perform a 12" move. The move is performed as an Advance Move in the Movement Phase, including any actions and restrictions the unit would normally have (such as Wheeling, Reforming, joining units, leaving units and so on). The 12" distance is used instead of the unit's Advance Rate and March Rate. This move cannot be used to move within 12" of enemy units. This is decreased to 6" for enemy units which have either Scouted or Vanguarded. Units that have moved in this way may not Declare Charges in the first Player Turn (if their side has the first turn). If both players have units with Vanguard, alternate moving units one at a time, starting with the player that finished deploying last. Instead of moving a unit, a player may declare to not move any more Vanguarding units.

Bei der Benutzung eines Bogens erhält die Schussattacke [b]Todesstoß (gegen Bestie)[/b] und Shots 2.

When using a Bow, the Shooting Attack gains [b]Lethal Strike (against Beast)[/b] and Shots 2.

Ein Charaktermodell mit Befehle darf einem Hauptregiment oder einer Unterstützungstruppe innerhalb von 8" einen einzelnen Befehl erteilen. Ein General mit Befehle darf stattdessen einem befreundeten Hauptregiment oder einer Unterstützungstruppe innerhalb der Reichweite seiner Befehlsgewalt einen einzelnen Befehl erteilen. Befehle werden zu Beginn jedes befreundeten Spielerzugs erteilt. Die Effekte der Befehle treten sofort in Kraft und wirken bis zum Ende des nächsten Spielerzugs. Eine Einheit kann denselben Befehl nicht mehr als einmal pro Spielerzug erhalten. Nur Modelle der Höhe Standard sind betroffen. Folgende Befehle stehen zur Verfügung: [b]Erste Reihe, auf die Knie![/b] Das Ziel erhält [b]Kämpft aus zusätzlichem Glied[/b]. [b]Legt an![/b] Das Ziel erhält [b]Treffsicher[/b]. [b]Marsch, Marsch![/b] Das Ziel erhält +1" Bewegungsrate und +4" Marschrate. [b]Standhaft bleiben![/b] Disziplintests die vom Ziel ausgeführt werden, unterliegen der Regel Minimierter Würfelwurf. Eine Einheit, die diesen Befehl erhält und einen Sammeltest besteht, wird nicht Erschüttert, und die Neuformierung nach dem Sammeln hindert die Einheit nicht an der Bewegung und/oder am Schießen (die Einheit zählt dennoch als bewegt bzgl. Schießen). d

A Character with Orders may give a single Order to a Parent or Support Unit within 8". A General with Orders may instead give a single Order to a friendly Parent or Support Unit within the range of its Commanding Presence. Orders are given at the start of each friendly Player Turn, and their effects last until the end of the next Player Turn. A unit cannot receive the same Order more than once during the same Player Turn. Only models of Standard Height are affected. The available Orders are listed below: [b]Brace For Impact![/b] The target gains [b]Fight in Extra Rank[/b]. [b]On The Double![/b] The target gains +1" Advance Rate and +4" March Rate. [b]Ready! Aim! Fire![/b] The target gains [b]Accurate[/b]. [b]Steady, Men![/b] Discipline Tests taken by the target are subject to Minimised Roll. A unit that receives this Order and passes a Rally Test doesn't become Shaken, and the Reform that is made after Rallying doesn't prevent the unit from moving and/or shooting (but it still counts as having moved for shooting purposes). d

Die Einheit des Modells erhält [b]Hass[/b]. Modellteile mit Angeschirrt sind davon nicht betroffen. Das Modell kann die folgenden drei gebundenen Zauber mit Energiestufe (4/8) wirken mit Typ: Einheit des Wirkenden und Unterstützung, sowie Dauer: Ein Zug: [b]Ullors Segen[/b] Das Ziel erhält [b]Rettungswurf (5+,gegen Nahkampfattacken)[/b]. [b]Sunnas Segen[/b] Das Ziel erhält [b]Flammenattacken[/b]. Alle gegnerischen Einheiten, die sich zum Zeitpunkt des Wirkens des Zaubers in Basekontakt mit einem oder mehreren Zielen dieses Zaubers befinden, erleiden W6 Treffer mit Stärke 4, Rüstungsdurchschlag 1, [b]Flammenattacken[/b] und [b]Magischen Attacken[/b]. [b]Volunds Segen[/b] Das Ziel [b]muss[/b] misslungene Verwundungswürfe mit Nahkampfattacken wiederholen.

The model's unit gains [b]Hatred[/b]. Model parts with Harnessed are not affected. The model can cast the following three Bound Spells with Power Level (4/8), Type: Caster's Unit and Augment, and Duration: One Turn. [b]Ullor's Blessing[/b] The target gains [b]Aegis (5+, against Melee Attacks)[/b]. [b]Sunna's Blessing[/b] The target gains [b]Flaming Attacks[/b]. All enemy units in base contact with one or more targets of this spell when the spell is cast suffer D6 hits with Strength 4, Armour Penetration 1, [b]Flaming Attacks[/b], and [b]Magical Attacks[/b]. [b]Volund's Blessing[/b] The target's failed to-wound rolls with Melee Attacks [b]must[/b] be rerolled.

The attack may not be used if the attacking model has made an Advance Move, March Move, Reform or Pivot during the current Player Turn.

The attack may not be used if the attacking model has made an Advance Move, March Move, Reform or Pivot during the current Player Turn.

Attacks & Weapons, Melee Unsaved wounds caused by the attacks are multiplied into the value given in brackets (X). If the value is a dice (e.g. Multiple Wounds (D3)), roll one dice for each unsaved wound with Multiple Wounds. The amount of wounds that the attack is multiplied into can never be higher than the Health Points Characteristic of the target (excluding Health Points lost previously in the battle). For example, if a Multiple Wounds (D6) attack wounds a unit of Trolls (HP 3) and rolls a '5' for the multiplier, the number of unsaved wounds is reduced to 3, even if the Troll unit has already lost one or two Health Points previously in battle. If Clipped Wings is stated after the X value in brackets, any unsaved wound caused by the attack against a model with Fly is multiplied into X+1 instead of X.

Attacks & Weapons, Melee Unsaved wounds caused by the attacks are multiplied into the value given in brackets (X). If the value is a dice (e.g. Multiple Wounds (D3)), roll one dice for each unsaved wound with Multiple Wounds. The amount of wounds that the attack is multiplied into can never be higher than the Health Points Characteristic of the target (excluding Health Points lost previously in the battle). For example, if a Multiple Wounds (D6) attack wounds a unit of Trolls (HP 3) and rolls a '5' for the multiplier, the number of unsaved wounds is reduced to 3, even if the Troll unit has already lost one or two Health Points previously in battle. If Clipped Wings is stated after the X value in brackets, any unsaved wound caused by the attack against a model with Fly is multiplied into X+1 instead of X.

When a Character is joined to a unit in which at least one model has Bodyguard, that Character gains Stubborn. When Characters or Character types are stated in brackets, Bodyguard only works for the specified Characters or Character types.

When a Character is joined to a unit in which at least one model has Bodyguard, that Character gains Stubborn. When Characters or Character types are stated in brackets, Bodyguard only works for the specified Characters or Character types.

+1 Armour Hand Weapons wielded by models on foot can be used alongside a Shield, then giving Parry.

+1 Armour Hand Weapons wielded by models on foot can be used alongside a Shield, then giving Parry.

During step 3 of the Magic Phase Sequence, each of the Active Player's models with Channel may add X Veil Tokens to the owner's Veil Token Pool. This Universal Rule is cumulative, adding X Veil Tokens of each independent instance of Channel to the model's total Channel value (so e.g. a model with Channel (1) and Channel (2) is treated like a model with Channel (3)).

During step 3 of the Magic Phase Sequence, each of the Active Player's models with Channel may add X Veil Tokens to the owner's Veil Token Pool. This Universal Rule is cumulative, adding X Veil Tokens of each independent instance of Channel to the model's total Channel value (so e.g. a model with Channel (1) and Channel (2) is treated like a model with Channel (3)).

Units with at least one model with Scoring are considered to be Scoring Units, which are used for winning Secondary Objectives (see section XVI.2 “Scoring Secondary Objectives", page 67). Every army needs a few Scoring units to be able to complete Secondary Objectives, which is why units with Scoring are marked in the Army Books with a special pennant icon: Scoring can be lost during the game: - A unit that is Fleeing loses Scoring for as long as it if Fleeing. - An Ambushing unit that enters the Battlefield on Game Turn 4 or later loses Scoring. - A unit that has performed a Post-Combat Reform loses Scoring until the start of the following Player Turn.

Units with at least one model with Scoring are considered to be Scoring Units, which are used for winning Secondary Objectives (see section XVI.2 “Scoring Secondary Objectives", page 67). Every army needs a few Scoring units to be able to complete Secondary Objectives, which is why units with Scoring are marked in the Army Books with a special pennant icon: Scoring can be lost during the game: - A unit that is Fleeing loses Scoring for as long as it if Fleeing. - An Ambushing unit that enters the Battlefield on Game Turn 4 or later loses Scoring. - A unit that has performed a Post-Combat Reform loses Scoring until the start of the following Player Turn.

If the attack wounds with a natural to-wound roll of 6+, its Armour Penetration is set to 10 and the target of the attack cannot take a Regeneration save against it.

If the attack wounds with a natural to-wound roll of 6+, its Armour Penetration is set to 10 and the target of the attack cannot take a Regeneration save against it.

If more than half of a unit's models are Fearless, the unit automatically passes Panic Tests and Decimated Tests and cannot declare a Flee Charge Reaction (unless already Fleeing). Models that are Fearless are also immune to the effects of Fear.

If more than half of a unit's models are Fearless, the unit automatically passes Panic Tests and Decimated Tests and cannot declare a Flee Charge Reaction (unless already Fleeing). Models that are Fearless are also immune to the effects of Fear.

When a unit composed entirely of models with Swiftstride rolls Charge Range, Flee Distance, Pursuit Distance or Overrun Distance, it rolls an additional D6 (normally this will lead to rolling 3D6) and discards the lowest D6 rolled.

When a unit composed entirely of models with Swiftstride rolls Charge Range, Flee Distance, Pursuit Distance or Overrun Distance, it rolls an additional D6 (normally this will lead to rolling 3D6) and discards the lowest D6 rolled.

Das Modell kann entscheiden, sich nicht zu bewegen, obwohl es Zufällige Bewegung hat, und seine Verfogungs- und Überrenndistanz beträgt in der Nahkampfphase [b]immer[/b] 0". Bevor es sich in der Bewegungsphase bewegt, kann das Modell sich dazu entscheiden, Zufällige Bewegung (4W3") mit [b]Zufällige Bewegung (5W3")[/b] bis zum Ende der Bewegungsphase zu ersetzen. In dem Fall kann die Dampfkanone während dieses Spielerzugs nicht verwendet werden.

The model may choose not to move despite having Random Movement, and its Pursuit and Overrun Distance in the Melee Phase are [b]always[/b] 0". Before moving in the Movement Phase, the model may choose to replace its Random Movement (4D3") with [b]Random Movement (5D3")[/b] until the end of the Movement Phase. If so, the Steam Cannon cannot be used during this Player Turn.

A unit with at least one model with Stubborn ignores any Combat Score penalties to its Discipline when taking Break Tests or Combat Reform Discipline Tests.

A unit with at least one model with Stubborn ignores any Combat Score penalties to its Discipline when taking Break Tests or Combat Reform Discipline Tests.

At step 8 of the Pre-­Game Sequence (after Spell Selection) an army that includes units with Scout must state which of its units with Scout will use it, starting with the player that picked the Deployment Zone. Deploy your army as usual, but without deploying any of the Scouting units. These units are placed after all other non-Scouting units have been deployed. They can either be deployed in your Deployment Zone, using the normal rules, or they can be deployed outside the Deployment Zone, but must be more than 18" away from any enemy units. This is decreased to 12" if the Scouting unit is deployed entirely within a Forest, Ruins, Field, Building, or Water Terrain Feature. Scouting units that are deployed outside their player's Deployment Zone may not Declare Charges in the first Player Turn (if their side has the first turn). If both players have Scouting units, alternate deploying one unit at a time, starting with the player that finished deploying first.

At step 8 of the Pre-­Game Sequence (after Spell Selection) an army that includes units with Scout must state which of its units with Scout will use it, starting with the player that picked the Deployment Zone. Deploy your army as usual, but without deploying any of the Scouting units. These units are placed after all other non-Scouting units have been deployed. They can either be deployed in your Deployment Zone, using the normal rules, or they can be deployed outside the Deployment Zone, but must be more than 18" away from any enemy units. This is decreased to 12" if the Scouting unit is deployed entirely within a Forest, Ruins, Field, Building, or Water Terrain Feature. Scouting units that are deployed outside their player's Deployment Zone may not Declare Charges in the first Player Turn (if their side has the first turn). If both players have Scouting units, alternate deploying one unit at a time, starting with the player that finished deploying first.

Once per Shooting Phase, an unengaged Engineer may select a single War Machine within 6″ that has not fired yet to gain the following effects: - Replace the Aim of one of the War Machine's Artillery Weapons with the value given in brackets (X+). - You may reroll the roll on the Misfire Table. - You may reroll the dice (all of them or none) for determining the number of hits of a Flamethrower Artillery Weapon.

Once per Shooting Phase, an unengaged Engineer may select a single War Machine within 6″ that has not fired yet to gain the following effects: - Replace the Aim of one of the War Machine's Artillery Weapons with the value given in brackets (X+). - You may reroll the roll on the Misfire Table. - You may reroll the dice (all of them or none) for determining the number of hits of a Flamethrower Artillery Weapon.

Wenn sich das Modell Rittern der Kaiserlichen Orden anschließt, erhält die Einheit [b]Furchtlos[/b]. Falls das Modell der General ist, erhalten die R&F Modelle der Einheit zusätzlich [b]Hauptregiment[/b].

When the model is joined to a unit of Knightly Orders, the unit gains [b]Fearless[/b], and if the model is the General, the R&F models in the unit also gain [b]Parent Unit[/b].

Wenn ein Modell mit Fanatisch durch eine Nahkampfattacke während eines Initiativeschritts der Nahkampfrunde, in der es kämpft, ausgeschaltet wird, entferne es erst am Ende von Initiativeschritt 0 als Verlust.

When a model with Fanatical is killed by a Melee Attack during any Initiative Step of a Round of Combat it is fighting, remove it as a casualty only at the end of Initiative Step 0.

A unit consisting solely of models with Feigned Flight that voluntarily chooses to Flee as a Charge Reaction, and subsequently passes a Rally Test in its next Player Turn, doesn't become Shaken. Furthermore, the Reform that is made after Rallying in this case doesn't prevent the unit from moving nor from shooting (but it still counts as having moved for shooting purposes). This rule cannot be applied if a unit fails to rally on the next friendly Player Turn or involuntarily Flees, such as a result of a failed Panic Test or if it was already Fleeing when being charged.

A unit consisting solely of models with Feigned Flight that voluntarily chooses to Flee as a Charge Reaction, and subsequently passes a Rally Test in its next Player Turn, doesn't become Shaken. Furthermore, the Reform that is made after Rallying in this case doesn't prevent the unit from moving nor from shooting (but it still counts as having moved for shooting purposes). This rule cannot be applied if a unit fails to rally on the next friendly Player Turn or involuntarily Flees, such as a result of a failed Panic Test or if it was already Fleeing when being charged.

Ein angreifender Modellteil mit Feuer beim Aufprall!, der eine Pistole, ein Pistolenpaar oder eine Repetierpistole benutzt, attackiert [b]immer[/b] im Initiativeschritt 10, und die Stärke seiner Nahkampfwaffenattacken wird auf 4 [b]gesetzt[/b] und ihr Rüstungsdurchschlag wird auf 2 [b]gesetzt[/b] (unabhängig von Agilität, Stärke und Rüstungsdurchschlag des Benutzers).

A Charging model part with Fire on Impact! using a Pistol, a Brace of Pistols, or a Repeater Pistol [b]always[/b] strikes at Initiative Step 10, and the Strength of its Close Combat Attacks is [b]set[/b] to 4 and their Armour Penetration is [b]set[/b] to 2 (regardless of the user's Agility, Strength, and Armour Penetration).

The model gains Light Troops and Swiftstride. Units composed entirely of models with Fly may make Flying Movements when performing a Move Chargers move, an Advance Move, or a March Move. When a unit makes a Flying Movement, substitute its models' Advance Rate with the first value given in brackets (X), and their March Rate with the second value given in brackets (Y). All modifiers to ground movement values are also applied to the flying values of a model. Units using Flying Movement ignore all Terrain Features and units during the Flying Movement (from their starting to their ending position), but must abide by the Unit Spacing rule at the end of the move (unless charging, when the normal exceptions to the Unit Spacing rule apply). They are still affected by the effects of the Terrain Features from which they take off and in which they land.

The model gains Light Troops and Swiftstride. Units composed entirely of models with Fly may make Flying Movements when performing a Move Chargers move, an Advance Move, or a March Move. When a unit makes a Flying Movement, substitute its models' Advance Rate with the first value given in brackets (X), and their March Rate with the second value given in brackets (Y). All modifiers to ground movement values are also applied to the flying values of a model. Units using Flying Movement ignore all Terrain Features and units during the Flying Movement (from their starting to their ending position), but must abide by the Unit Spacing rule at the end of the move (unless charging, when the normal exceptions to the Unit Spacing rule apply). They are still affected by the effects of the Terrain Features from which they take off and in which they land.

At the start of the Charge Phase, each of your nonFleeing units with at least one model with Frenzy that is unengaged, does not contain any Shaken models, and has an enemy unit inside its Front Arc within the unit’s Advance Rate +7″ must take a Discipline Test, called a Frenzy Test. If the test is failed, the whole unit must declare a Charge this Player Turn if possible. Frenzy Tests and Restrain Pursuit Tests taken by units with at least one model with Frenzy are subject to Maximised Roll. If there are different Advance Rates available in the unit, the Advance Rate used for the Frenzy Test and for the Charge Range is determined as follows: • If a model has more than one Advance Rate (e.g. due to Fly), the model must use the Advance Rate that has the highest chance of completing the Charge. • If a unit contains models with different Advance Rates, the unit must use the highest Advance Rate that all models in the unit can use (which will usually be the lowest Advance Rate in the unit). For example, a model with Advance Rate 2″ and Fly (8″, 16″) must use the Advance Rate from Fly. And if a Character in a Combined Unit has Advance Rate 4″ while the R&F models have 6″, the Combined Unit must use Advance Rate 4″. Note that when a unit is forced to declare a Charge due to a failed Frenzy Test, it is not forced to Charge the enemy unit that triggered the Frenzy Test.

At the start of the Charge Phase, each of your nonFleeing units with at least one model with Frenzy that is unengaged, does not contain any Shaken models, and has an enemy unit inside its Front Arc within the unit’s Advance Rate +7″ must take a Discipline Test, called a Frenzy Test. If the test is failed, the whole unit must declare a Charge this Player Turn if possible. Frenzy Tests and Restrain Pursuit Tests taken by units with at least one model with Frenzy are subject to Maximised Roll. If there are different Advance Rates available in the unit, the Advance Rate used for the Frenzy Test and for the Charge Range is determined as follows: • If a model has more than one Advance Rate (e.g. due to Fly), the model must use the Advance Rate that has the highest chance of completing the Charge. • If a unit contains models with different Advance Rates, the unit must use the highest Advance Rate that all models in the unit can use (which will usually be the lowest Advance Rate in the unit). For example, a model with Advance Rate 2″ and Fly (8″, 16″) must use the Advance Rate from Fly. And if a Character in a Combined Unit has Advance Rate 4″ while the R&F models have 6″, the Combined Unit must use Advance Rate 4″. Note that when a unit is forced to declare a Charge due to a failed Frenzy Test, it is not forced to Charge the enemy unit that triggered the Frenzy Test.

Das Modell besteht automatisch durch Entsetzen verursachte Paniktests.

The model automatically passes Panic Tests caused by Terror.

Universal Rule. The model gains Support Unit.

Universal Rule. The model gains Support Unit.

Eine Einheit gilt als Hauptregiment, wenn mindestens die Hälfte ihrer Modelle diese Universalregel hat. Hauptregimenter behandeln alle Unterstützungstruppen als [b]Bedeutungslos[/b]. Sofort wenn ein Hauptregiment in der Angriffsphase einen erfolgreichen Wurf für die Angriffsreichweite gegen eine nicht fliehende gegnerische Einheit würfelt, dürfen, bevor die Angriffsbewegung durchgeführt wird, Unterstützungstruppen innerhalb von 8" um das Hauptregiment einen Unterstützungsangriff durchführen. Dazu sagt die gesamte Unterstützungstruppe einen Angriff gegen dieselbe gegnerische Einheit an. Wende die üblichen Regeln für Angriffe für diesen Angriff außer der Reihe an (wie Sichtlinie, Frontbereich, Auswürfeln der Angriffsreichweite, maximal ein Schwenk, usw.), mit der Ausnahme, dass der Gegner keine andere Angriffsreaktion als Angriff annehmen wählen kann. Dies wird hinsichtlich Angriffsbewegungen wie ein kombinierter Angriff behandelt. Kombiniere beim Berechnen des Kampfergebnisses in der folgenden Nahkampfphase (unter Berücksichtigung der regulären Einschränkungen) die Gliederboni des Hauptregiments und bis zu einer Unterstützungstruppe, die einen erfolgreichen Unterstützungsangriff durchgeführt hat, bis zu einem Maximum von +6.

A unit is considered a Parent Unit if at least half of its models have this Universal Rule. Parent Units treat all Support Units as [b]Insignificant[/b]. Immediately after a Parent Unit passes a Charge Range roll against a non-Fleeing enemy unit in the Charge Phase, before performing the Charge Move, any Support Units within 8" of the Parent Unit may perform a Support Charge. To do so, the whole Support Unit declares a Charge against the same enemy unit. Apply all of the usual rules for Charging for this out-of-sequence Charge (such as Line of Sight, Front Arc, must roll for Charge Range, max. one Wheel, etc.), with the exception that the enemy cannot choose a Charge Reaction other than Hold. For the purpose of Charge Moves, treat this as any other case of Combined Charges. When calculating Combat Scores in the following Melee Phase, combine the Rank Bonus of both the Parent Unit and up to one Support Unit that performed a successful Support Charge (following all normal restrictions), up to a maximum of +6.

Befreundete Einheiten innerhalb von 6" um das Modell erhalten [b]Hass[/b]. Modellteile mit Angeschirrt sind davon nicht betroffen. Alle vom Reiter als gebundene Zauber gewirkten Segen erhalten Typ: Aura und Reichweite 6" (ersetzt Typ: Einheit des Wirkenden). Das Modell kann Unerring Strike (Divination) als gebundenen Zauber mit Energiestufe (4/8) sprechen.

Friendly units within 6" of the model gain [b]Hatred[/b]. Model parts with Harnessed are not affected. For Bound Spells from Blessings cast by the rider, Type: Caster's Unit is replaced with Type: 6" Aura. The model can cast Unerring Strike (Divination) as a Bound Spell with Power Level (4/8).

The model can draw Lines of Sight in any direction (i.e. it is not limited by the Front Arc) from any point on its base (remember that Charge Moves are limited by a single Wheel of no more than 90°, and that Stand and Shoot Charge Reactions can only be done against enemies in the Front Arc) and can always use Shooting Attacks from any rank (they are not limited to shooting from first and second rank). Units with at least one R&F model with Skirmisher are formed into a skirmish formation. They are not placed in base to base contact with each other. Instead, models are placed with a 12.5 mm distance between them. This gap is considered part of the unit for Cover purposes, and will have the same Size as the models in the unit. Other than this gap between models, units with Skirmisher follow the normal rules for forming units and therefore have a Front, two Flanks, a Rear, can perform Supporting Attacks, and so on. Units in skirmish formation gain Hard Target and Light Troops, never block Line of Sight, and when units in skirmish formation would contribute to Hard Cover, they contribute to Soft Cover instead.

The model can draw Lines of Sight in any direction (i.e. it is not limited by the Front Arc) from any point on its base (remember that Charge Moves are limited by a single Wheel of no more than 90°, and that Stand and Shoot Charge Reactions can only be done against enemies in the Front Arc) and can always use Shooting Attacks from any rank (they are not limited to shooting from first and second rank). Units with at least one R&F model with Skirmisher are formed into a skirmish formation. They are not placed in base to base contact with each other. Instead, models are placed with a 12.5 mm distance between them. This gap is considered part of the unit for Cover purposes, and will have the same Size as the models in the unit. Other than this gap between models, units with Skirmisher follow the normal rules for forming units and therefore have a Front, two Flanks, a Rear, can perform Supporting Attacks, and so on. Units in skirmish formation gain Hard Target and Light Troops, never block Line of Sight, and when units in skirmish formation would contribute to Hard Cover, they contribute to Soft Cover instead.

Inanimate - Melee Model parts with Inanimate cannot make Close Combat Attacks and cannot use Shooting Weapons. Shooting Weapons carried by model parts with Inanimate can be used by other model parts of the same model (as long as they do not have Harnessed or Inanimate).

Inanimate - Melee Model parts with Inanimate cannot make Close Combat Attacks and cannot use Shooting Weapons. Shooting Weapons carried by model parts with Inanimate can be used by other model parts of the same model (as long as they do not have Harnessed or Inanimate).

The model gains Fearless and its unit automatically passes all Break Tests. Characters with Unbreakable can only join units consisting entirely of models with Unbreakable. Units with one or more models with Unbreakable can only be joined by Characters with Unbreakable.

The model gains Fearless and its unit automatically passes all Break Tests. Characters with Unbreakable can only join units consisting entirely of models with Unbreakable. Units with one or more models with Unbreakable can only be joined by Characters with Unbreakable.

The model cannot be the General.

The model cannot be the General.

The model cannot Pursue, Declare Charges or Declare Flee as Charge Reaction. Characters can never join units with War Machines, and Characters with War Machine cannot join units at all. When a War Machine fails a Panic Test, instead of Fleeing it is Shaken until the end of the next Player Turn. War Machines that fail a Break Test are automatically destroyed. War Machines and units Engaged in Combat with them cannot make Combat Reforms. When a unit charges a War Machine, it can move into base contact by having its Front Facing contact any point of the War Machine's base (it must still maximise the number of models in base contact, see subsection II.1.A “Bases and Base Contact", page 4 and Figure 1 page 4). No Align Move is allowed. Ignore the War Machine's Facing, as it does not have any due to its round base.

The model cannot Pursue, Declare Charges or Declare Flee as Charge Reaction. Characters can never join units with War Machines, and Characters with War Machine cannot join units at all. When a War Machine fails a Panic Test, instead of Fleeing it is Shaken until the end of the next Player Turn. War Machines that fail a Break Test are automatically destroyed. War Machines and units Engaged in Combat with them cannot make Combat Reforms. When a unit charges a War Machine, it can move into base contact by having its Front Facing contact any point of the War Machine's base (it must still maximise the number of models in base contact, see subsection II.1.A “Bases and Base Contact", page 4 and Figure 1 page 4). No Align Move is allowed. Ignore the War Machine's Facing, as it does not have any due to its round base.

Units composed entirely of models with Light Troops are allowed to make any number of Reforms when performing Advance Moves or March Moves. They are allowed to shoot even if they Marched or Reformed. No model can end its movement with its centre further away than its March Rate from its starting position, around any obstructions (including the Unit Spacing rule). This means that when checking the distance travelled by a model, check the path the model would have taken if it was alone, with the exception that the unit as a whole cannot break the Unit Spacing rule while performing the move. If a model performed any action during the movement (such as a Sweeping Attack), the distance moved is counted from its starting position to the point on the Battlefield where it performed that action and then to its final position. If more than half the models in a unit have Light Troops, the unit always counts as having 0 Full Ranks. Characters with Light Troops that are joined to units with one or more models without Light Troops, lose this rule for as long as they remain with the unit. An Infantry Character joined to an Infantry unit with both Light Troops and the same Size as the Character gains Light Troops for as long as it remains with the unit.

Units composed entirely of models with Light Troops are allowed to make any number of Reforms when performing Advance Moves or March Moves. They are allowed to shoot even if they Marched or Reformed. No model can end its movement with its centre further away than its March Rate from its starting position, around any obstructions (including the Unit Spacing rule). This means that when checking the distance travelled by a model, check the path the model would have taken if it was alone, with the exception that the unit as a whole cannot break the Unit Spacing rule while performing the move. If a model performed any action during the movement (such as a Sweeping Attack), the distance moved is counted from its starting position to the point on the Battlefield where it performed that action and then to its final position. If more than half the models in a unit have Light Troops, the unit always counts as having 0 Full Ranks. Characters with Light Troops that are joined to units with one or more models without Light Troops, lose this rule for as long as they remain with the unit. An Infantry Character joined to an Infantry unit with both Light Troops and the same Size as the Character gains Light Troops for as long as it remains with the unit.

Hat sich der Werksmeister einem Hauptregiment oder einer Unterstützungstruppe angeschlossen, darf er dieser den Befehl [b]Legt an![/b] erteilen.

The Master Artificer may give the Order [b]Ready! Aim! Fire![/b] to a Parent Unit or Support Unit it has joined.

Universal Rule. The model may give two Orders per turn instead of one.

Universal Rule. The model may give two Orders per turn instead of one.

The unit cannot Declare Charges and cannot move normally (Advance, March, Reform) in the Movement Phase (which also means they cannot perform Magical Moves). The model loses Swiftstride (and can never gain it), but always charges, Flees, Pursues and Overruns the distance stated in brackets. In the Movement Phase, at the end of step 2 of the the it with Random Movement moves using the rules for Pursuing units, except that they can freely choose which direction to rotate towards before rolling the Pursuit Distance, cannot move off the Board Edge and only take Dangerous Terrain Tests if they actually charge an enemy unit (they still test as normal when Fleeing, Pursuing a Broken enemy or Overrunning). Whenever a unit with Random Movement needs a March Rate (e.g. when Post-Combat Reforming), use the potential maximum value of X as its March Rate. Characters with Random Movement can only join units with Random Movement (by moving into contact with them during the Movement Phase or by being deployed inside), and units with Random Movement can only be joined by Characters with Random Movement. Units with Random Movement cannot enter Buildings. If a unit has several sets of Random Movement, use the one with the lowest average (in case of a tie, you may choose which version to use). A model with Random Movement cannot move in the same phase as it arrives on the Battlefield as Reinforcement (Dawn Assault) or Ambusher.

The unit cannot Declare Charges and cannot move normally (Advance, March, Reform) in the Movement Phase (which also means they cannot perform Magical Moves). The model loses Swiftstride (and can never gain it), but always charges, Flees, Pursues and Overruns the distance stated in brackets. In the Movement Phase, at the end of step 2 of the the it with Random Movement moves using the rules for Pursuing units, except that they can freely choose which direction to rotate towards before rolling the Pursuit Distance, cannot move off the Board Edge and only take Dangerous Terrain Tests if they actually charge an enemy unit (they still test as normal when Fleeing, Pursuing a Broken enemy or Overrunning). Whenever a unit with Random Movement needs a March Rate (e.g. when Post-Combat Reforming), use the potential maximum value of X as its March Rate. Characters with Random Movement can only join units with Random Movement (by moving into contact with them during the Movement Phase or by being deployed inside), and units with Random Movement can only be joined by Characters with Random Movement. Units with Random Movement cannot enter Buildings. If a unit has several sets of Random Movement, use the one with the lowest average (in case of a tie, you may choose which version to use). A model with Random Movement cannot move in the same phase as it arrives on the Battlefield as Reinforcement (Dawn Assault) or Ambusher.

Range 12" Shots 1 Strength 4 Armour Penetration 2 QuicktoFire

Range 12" Shots 1 Strength 4 Armour Penetration 2 QuicktoFire

The model gains Tall and can never be joined or join a unit (unless it is a War Platform). A model with Towering Presence increases its Rally Around the Flag and Commanding Presence ranges by 6".

The model gains Tall and can never be joined or join a unit (unless it is a War Platform). A model with Towering Presence increases its Rally Around the Flag and Commanding Presence ranges by 6".

Attack Attribute – Close Combat. Whenever the model loses a Health Point, it gains +1 Attack Value. Whenever it gains a Health Point, it suffers −1 Attack Value.

Attack Attribute – Close Combat. Whenever the model loses a Health Point, it gains +1 Attack Value. Whenever it gains a Health Point, it suffers −1 Attack Value.

Die Einheit wird von Hauptregimentern und Unterstützungstruppen als [b]Bedeutungslos[/b] behandelt.

The unit is treated as [b]Insignificant[/b] by Parent and Support Units.

Artillery Weapon. Cannon, Range 36″, Shots 1, Str 3 [7], AP 0 [6], Area Attack (1×5), [Multiple Wounds (D3, Clipped Wings)].

Artillery Weapon. Cannon, Range 36″, Shots 1, Str 3 [7], AP 0 [6], Area Attack (1×5), [Multiple Wounds (D3, Clipped Wings)].

Eine Einheit gilt als Unterstützungstruppe, wenn mindestens die Hälfte ihrer Modelle diese Universalregel hat. Unterstützungstruppen werden von Hauptregimentern als [b]Bedeutungslos[/b] behandelt. Unterstützungstruppen innerhalb von 8" um mindestens ein Hauptregiment erhalten [b]Kämpft aus zusätzlichem Glied[/b] und dürfen Schussattacken aus dem 3. Glied (zusätzlich zum 1. und 2.) durchführen. Falls die Unterstützungstruppe mindestens ein vollständiges Glied hat, zählt sie, , falls sie weniger volle Glieder hat, als das Hauptregiment, als hätte sie dieselbe Anzahl an vollständigen Gliedern wie ein Hauptregiment innerhalb von 8", wenn ermittelt wird, ob die Einheit standhaft ist. Während der gegnerischen Angriffsphase dürfen Unterstützungstruppen eine der folgenden Aktionen durchführen: 1. Sofort nachdem ein nicht im Nahkampf gebundenes Hauptregiment innerhalb von 8" eine Angriffsreaktion außer einer obligatorischen Flucht Angrifssreaktion ansagt, darf die Unterstützungstruppe Stehen und Schießen, als ob der Gegner einen Angriff gegen sie an ihrer aktuellen Position angesagt hätte (wende die normalen Regeln für die Stehen und Schießen-Angriffsreaktion an). 2. Sofort nachdem alle gegnerischen Einheiten ihre Angriffsbewegungen durchgeführt haben, dürfen Unterstützungstruppen innerhalb von 8" um ein Hauptregiment, das in dieser Phase erfolgreich angegriffen wurde, einen Gegenangriff starten. Wähle dazu eine gegnerische Einheit, die das Hauptregiment erfolgreich angegriffen hat, und sage mit der gesamten Unterstützungstruppe einen Angriff gegen sie an. Wende alle üblichen Regeln für Angriffe für diesen Angriff außer der Reihe an (wie Sichtlinie, Frontbereich, Auswürfeln der Angriffsreichweite, maximal ein Schwenk, usw.). Kombiniere beim Berechnen des Kampfergebnisses in der folgenden Nahkampfphase (unter Berücksichtigung der regulären Einschränkungen) die Gliederboni des Hauptregiments und bis zu einer Unterstützungstruppe, die einen erfolgreichen Untersützungsangriff durchgeführt hat, bis zu einem Maximum von +6.

A unit is considered a Support Unit if at least half of its models have this Universal Rule. Support Units are treated as [b]Insignificant[/b] by Parent Units. Support Units within 8" of at least one Parent Unit gain [b]Fight in Extra Rank[/b] and may use Shooting Attacks from the third rank (in addition to the first and second). If the Support Unit has at least one Full Rank, it counts as having the same number of Full Ranks as a Parent Unit within 8" for the purpose of being Steadfast if it has fewer Full Ranks than the Parent Unit. During the opponent's Charge Phase, Support Units may perform one of the following actions: 1. Immediately after an unengaged Parent Unit within 8" declares a Charge Reaction other than a mandatory Flee Charge Reaction, the Support Unit may Stand and Shoot as if the enemy had declared a Charge against them in their current position (apply the normal rules for the Stand and Shoot Charge Reaction). 2. Immediately after all enemy units have completed their Charge Moves, Support Units within 8" of any Parent Unit that was successfully Charged in this phase may Counter Charge. To do so, choose one enemy unit that successfully Charged the Parent Unit and declare a Charge with the whole Support Unit. Apply all the usual rules for Charging for this out-of-sequence Charge (such as Line of Sight, Front Arc, must roll for Charge Range, max. one Wheel, etc.). When calculating Combat Scores in the following Melee Phase, combine the Rank Bonus of both the Parent Unit and up to one Support Unit that performed a successful Counter Charge (following all normal restrictions), up to a maximum of +6.

Prälaten dürfen sich dieser Einheit anschließen und erhalten [b]Furchtlos[/b] und [b]Unerschütterlich[/b], solange sie der Einheit angeschlossen sind.

Prelates may join the unit and gain [b]Fearless[/b] and [b]Unbreakable[/b] while joined to the unit.